Is it possible to change the baud rate in MotionLink? Or to get an old version of MotionLink when it was still possible?
I was running MotionLink 3.3.8 to evaluate the ICM20948 on the SK-20948. All was fine with that, even with a few code modifications on the Atmel SAMG55. I then connected the EV_ICM-20948 to my target processor (a PIC32). I brought up the MotionDriver with the command interface and wanted to test using the MotionLink software. However, the PIC is unable to produce 921600 baud (and 1000000 that it can produce is not close enough for UART to work).
I would like to decrease the baud rate to 115200, though I understand I won't be able to get high speed data.
In the MotionLink User Manual Version 3.0, on page 14, there is an image of a MotionLink 1.2.0.1 that supports the ICM20948 and appears to allow the user to set the baud rate. May I please have this version of software?