as starting MPU6050

By squirr3l , 15 May 2013

hello, after greeting them, would like to see if they can help initiate and retrieve data from a MPU6050, and seen cy programs to arduino, but my language is the microchip assembler, maybe they can give me information on how to start it and I write my. asm, would be helpful and that I have the chip but not and accomplished nothing, without more, will, send a hug diego

guy_mcilroy

12 years 10 months ago

Check out this App note, http://ww1.microchip.com/downloads/en/AppNotes/01440a.pdf

You can also check out our Motion Driver project, or the microchip port. Both are available on our Download page.

phpbb Post ID
23094

squirr3l

12 years 10 months ago

hello, thank you very much for coming to my request, I tell you I wrote simple program to i2c software, e been making a simulation in proteus with 24C01 memory with address 0xA0 to see if I returned the ack 9 bit and it works fine, then charge my program to a microphone connected to 6050, but this time sending the address 0x68 and anything not ack me back, so I assume not recognize or bus is the address for the 6050, actually I'm in the oven, I'll review what you send me to see what I can find fault, I send you a hug and if anything maybe I overlooked appreciate you put me in knowledge, and I have the hot seat, lol, once I recognize the ack already and empesado to battle but for now nothing

phpbb Post ID
23097

squirr3l

12 years 10 months ago

Well, thanks again for the help, I got my code to work, and I can read and write to the MPU6050, now would need imprecindibles know records are set to start reading data, thank you very much

phpbb Post ID
23100

squirr3l

12 years 10 months ago

sectionsbest escribio :

Echa un vistazo a esta nota de aplicación, http://ww1.microchip.com/downloads/en/A ... 01440a.pdf Usted puede también echa un vistazo a nuestro proyecto controlador de movimiento, o el puerto de microchip. Ambos están disponibles en nuestra página de descargas.


I try to download the project you mention but the page will not let me, you'll know why?

phpbb Post ID
23103

guy_mcilroy

12 years 10 months ago

Hi, check out the Download page and refer to the microchip link provided there. Microchip contact info is available through the link.

phpbb Post ID
23106
phpbb Topic ID
15303