It seems not be possible to activate IIR Filter in Mode4 Config1 Register over the Motionlink 4.2.6 user interface. Values >0x1f were limited to 0x1f
Has someone the same problem?
- Log in to post comments
phpbb Topic ID
44944
It seems not be possible to activate IIR Filter in Mode4 Config1 Register over the Motionlink 4.2.6 user interface. Values >0x1f were limited to 0x1f
Has someone the same problem?
Hello,
Please refer to "AN-000328-ICP-20100 User Configurable Operation Mode and IIR Filter" detailed implementation of mode 4 with ICP-20100. MotionLink does not offer user configuration of Mode4.
https://invensense.tdk.com/products/smartpressure/icp-20100/
If you're facing difficulties activating the IIR filter in the Motionlink 4.2.6 user interface and notice a limitation where values exceeding 0x1f are restricted to 0x1f, consider checking the software documentation for any specified limitations or guidelines regarding the Mode4 Config1 Register. Ensure you're using the latest software version, and explore user forums or contact support for insights from others who may have encountered similar issues. Confirm the valid range for the register values, follow any recommended configuration sequences, and, if necessary, reach out to the software's manufacturer or developer for specific guidance.