Hi! I need to increase the INT pulse lenght when running the CH201 in free-running mode. It is currently measured to 1us. I am using the SAMD21 and when running at normal 48MHz this is not an issue, but when introducing MCU sleep mode and lower clock frequency on the MCU external interrupt handler peripheral, this 1us period becomes a problem. It is to short for the MCU to register new data available on the CH201.
Anybode here know how to do this change? Or if it is possible at all?
Sorry, not support in the official firmware release. If really need, you can contact our sales team to submit a firmware customize request for your project.